March 18, 2011

RevCon reaches 200 installed units in the UK

~ Energy saving technology has huge potential in testing engines, transmission and braking industry ~

CP Automation, the UK distributor of Elektrotechnishe Anlagen’s RevCon system has completed its 200th UK application using the system. RevCon’s global installed base is now in excess of 10,000 units and the product can be found in industries from testing for engines, transmission and braking to the built environment.

Amongst CP Automation’s installations in the UK are One Canada Square, the tallest elevator in Europe, and the newly re-opened Express Lift Tower in Northampton.

RevCon, which returns the energy produced when a motor slows down to the grid, has proven hugely popular in the testing for engines, transmission and braking industry. Because the motors driving such applications are required to brake constantly as the application slows down and stops, the potential for saving with the unit is much larger than in some other sectors.

“The 200th installed unit isn’t just a milestone for us, it’s a demonstration that there is a huge market for RevCon in the United Kingdom,” explained Tony Young, managing director of CP Automation and its sister company Euroserv. “Sometimes technology makes perfect sense; because it saves more money and energy than it costs; making it the very definition of ROI. This is one of those times.”

RevCon can use a feed-in tariff, similar to those found on domestic and semi commercial wind turbines, to allow the customer to charge the electricity supplier for the returnedpower should the building or factory not use the energy locally. RevCon will work with any AC drive and is much more cost efficient than using two inverters to achieve the same effect. The product can be retrofitted to any inverter, irrespective of design or manufacturer, thanks to its versatile non-software driven installation protocol.

Ends: 350 words
Editor’s note: If you want to stay constantly up to date on the latest news from CP Automation, paste the following link into your RSS reader If you don’t have an RSS reader, I can recommend the following free package Sharp Reader.

For further information contact:
Tony Young, CP Automation
Unit 8, Ashley Industrial Estate, Exmoor Avenue,
Scunthorpe, DN15 8NJ
Telephone: +44 (0)1724 851 515
Fax: +44 (0)1724 851516
www: and

Press enquiries: Richard Stone
Stone Junction, Business Innovation Centre, Staffordshire Technology Park,
Beaconside, Stafford, Staffordshire, ST18 0AR
Telephone: +44 (0) 1785 225416
Fax: +44 (0) 20 8699 7743

About CP Automation: CP Automation is a specialist in the repair and replacement of automation equipment including electronic boards, PLCs and Ac and DC drives. It was established to provide an independent maintenance service, without exclusive ties to any manufacturer. However, it does have strong relationships with the principal inverter, encoder, resistors and motor manufacturers.

Ref: CPA043/10/10
Bookmark and Share

No comments: